SR Smith - 6 Ft. Frontier II Board With Frontier II Stand Silver Gray Mt & White Spring - SRS-68-209-586621T

View Larger Image |
| Our Price: $606.00 |
|
Retail:  $788.00 |
| Product SKU: |
SRS-68-209-586621T |
| Manufacturer: |
SR Smith |
| Shipping: |
|
| Stock Status: |
Usually ships within 24-48 hrs. of processing order. |
|
|
| Product Information |
SR Smith - 6 Ft. Frontier II Board With Frontier II Stand Silver Gray Mt & White Spring
|
SR Smith - Diving Board | Our most economical jump stand complete with 6' board and white spring is designed for most residential pools. The steel spring is mounted directly to the deck for a low profile look. The matching tread, composed of natural sand, is one of the safest diving surfaces available. | Warranty One year full warranty from date of purchase. Important Notice When purchasing a diving board from Swimming Pools Etc the purchaser assumes all risk of installation and use. Swimming Pools Etc makes no warranty as to the size or type of pool in which the diving board can be used or installed. Swimming Pools Etc makes no warranty of use or merchantability for a specific purpose. The purchaser will rely on its contractor and the manufacturer for installation and use instructions. SPECIAL NOTE
Diving boards (including spring boards, jump boards and starting platforms) shall be installed only on pools meeting or exceeding minimum requirements for the various pool types as outlined in the current edition of ANSI/NSPI-1 (for public pools), ANSI/NSPI-5 (for residential pools). In addition, all installations must meet or exceed applicable local codes in accordance with S.R.SMITH written instructions.
REFER TO PRODUCT INSTALLATION MANUAL FOR COMPLETE INSTALLATION REQUIREMENTS AND INSTRUCTIONS.
INSTALLATION TABLE
Refer to Schematic shown above/right, S.R.SMITH INSTALLATION INSTRUCTIONS FOR RESIDENTIAL INGROUND SWIMMING POOLS
* S and WA DIMENSION ARE VALID ONLY IN CONJUNCTION WITH MIN. DEPTH AT POINT A. (Refer to drawing and Table 1 on Page 90.) ** When coping is used do not set front bolts of jig closer than 3" from the back edge of the coping.
|
|
|
|