|
| Key | Part Number | Name | No. Req'd |
| 1 | 2920816000 | Lid | 1 |
| 2 | 2921141210 | O-Ring 137 x 5mm (after October 2002) | 1 |
| 2 | 2921141210 | O-Ring-Lid 135 x 5mm (before October 2002) | 1 |
| 3 | 2920814300 | Basket Complete | 1 |
| 4 | 2921441210 | O-Ring-Union 68 x 3mm | 2 |
| 5 | 2921770000 | Union With Nut And O-Ring 3" | 2 |
| 5 | 2921770001 | Union With Nut And O-Ring 2" | 2 |
| 6 | 2921658200 | Drain Cap 3/8" With Seal - Casing | 1 |
| 8 | 2921710103 | Casing (PP30GF) | 1 |
| 9 | 2991300035 | Locknut-Casing Bolt, 1/4-20 Serrated SS | 8 |
| 10 | 2920141210 | O-Ring-Diffuser 90 x 5mm | 1 |
| 11 | 2921417420 | Diffuser, Noryl | 1 |
| 12 | 2921700002 | Impeller (VI) 3.5HP, S.F.1.0, 118.5/21mm | 1 |
| 12 | 2920523030 | Impeller (V) 2.5 HP, S.F.1.0, 117/16mm | 1 |
| - | 2921710000 | Spacer-Impeller, PVC 10mm | 1 |
| 13 | 2921141222 | O-Ring-Casing 190x6mm | 1 |
| 14 | 2920343310 | Mechanical Seal 20mm (Complete) | 1 |
| 18 | 2921116111 | Seal Housing | 1 |
| 19 | 2991000067 | Bolt-Motor Bolt, Hex 3/8-16 x 2" S.S. | 4 |
| 20 | 2991400035 | Washer-Motor Bolt 3/8" SS | 4 |
| 21 | 2921411300 | Flange | 1 |
| 21 | 2921111300 | Flange (prior to 05/98) | 1 |
| 22 | 2991300032 | Bolt-Casing, Hex/Slot 1/4-20 x 2-1/8" SS | 8 |
| 23 | 2920110200 | Motor Flange | 1 |
| 24 | 2921417480 | Lockring-Diffuser SS | 1 |
| 25 | 2921190000 | Screw-Diffuser Lockring Allen Head | 2 |
| 26 | 5871250600 | Washer-Lockring Screw | 2 |
| 27 | 2920889403 | Base | 1 |
| 28 | 2920891030 | Tapping Screw-Base Phillips 6.3 x 16mm | 2 |
| 29 | 2920889410 | Lego Spacer Block | 6 |
| - | 2921196000 | Spanner For Lid | 1 |
| - | 2921717999 | Seal Housing/Diffuser Upgrade (a) | 1 |
| - | | (a): Includes Seal Housing, Diffuser, Lockring W/Screws & Washers | |
| - | | Note: When replacing the casing, you msut also replace the lid o-ring with part# 2921141210 (137 x 5mm) | |
