Store Search
Product Catalog
Search By Manufacturers
Replacement Parts
Store Info

Safety Fencing for Inground Swimming Pools

Protect-A-Pool Inground Removable Safety Fence

The removable PROTECT-A-POOL® fencing system is the easiest way to make your pool safe from unwanted intrusion of children, pets or stray animals. While easy to install and remove, the patent pending pole design can withstand over 200 lbs. of pressure - stronger than the competition!

While there is no substitute for adult supervision, Removable Fencing is designed to provide the pool owner with added security. According to the U.S. Consumer Product Safety Commission, accidental drowning is one of the leading causes of death to children under the age of five in the United States. In some sunbelt states, drowning is the number one killer of children.

Removable Fencing is engineered with child safety in mind. Drowning happens quickly and without warning, so surrounding pools and other hazardous areas with Removable Fencing will keep children safer while providing you peace of mind for years to come.

When properly installed under tension, the transparent mesh fabric won't allow children, pets, or toys to pass under the fence. The climb resistant surface is safe for unsteady toddlers who may fall against it.

ADD ANOTHER LAYER OF PROTECTION AROUND YOUR POOL!
This safety fencing offers protection to small children, pets, handicapped and elderly people by creating a barrier to the pool's edge.

In only seconds, an adult can unlatch a panel of the fence for easy access to the swimming pool.

Cantar Protect-A-Pool fence sections are made in pre-assembled 10-foot lengths and can be shortened to fit any requirements.

An exclusive micro-hole system requires that only 5/8" holes be drilled in the deck for installation. When you want an unobscured view to the pool for special events, Cantar Protect-A-Pool fencing can be completely removed or reinstalled by just one person in minutes!

The lightweight fence sections roll up for compact storage and plastic covers are provided to plug the deck holes when the fence is not in use.

Fencing comes complete with hardware, measuring template and instructions.

Drill guide is available for a refundable deposit (see listing below). A rotary hammer drill is required for installation.

INSTALLATION VIDEO INCLUDED WITH DRILL GUIDE

Safety Fences

Warning!
Please be aware of other fence companies leaving huge holes and to beware of cement cracking due to the large holes drilled and that these are cheaper Chinese made fences.

Safety Fences
Fence Install

Pool fnecing sections latch together with a metal latch for easy installation.
Posts fit into anchor sockets to keep the fencing in place.
Self Latching Gate

Protect-A-Pool Safety Fences
Call Us: 1-800-544-3730
MFG # Description
GLI-4300500 Inground Safety Pool Fence
4ft x 10ft Black
GLI-4300501 Inground Safety Pool Fence
5ft x 10ft Black
GLI-4300532 4ft Support Poles - Black
GLI-4300534 4ft Support Poles - Green
GLI-4300533 5ft Support Poles - Black
GLI-4300535 5ft Support Poles - Green
GLI-4300650 36 in x 48 in Removable gate Only - Black
GLI-4300652 36 in x 48 in Removable gate Only - Green
GLI-4300651 36 in x 60 in Removable gate Only - Black
GLI-4300653 36 in x 60 in Removable gate Only - Green
OMC-4300960 Magna Latch and Hinge Kit
Drilling Guide
GLI-4300520 Protect-A-Pool Drill Guide.
Deposit - Refundable upon return of drill guide. Non refundable shipping charge does apply.
Call us for all your Safety Fence question.

 

Key Features

  • Removes and reinstalls in minutes with an ordinary hammer drill
  • Transparent panels provide climb resistant surface - no toeholds or finger holds
  • Durable baked-on TGIC powder coat finish
  • Stainless steel screws and hardware won't rust
  • Ideally suited for any environment
  • Exceeds OSHA test standards
  • Sections latch together quickly - unlatch in seconds for pool access or use the optional self-closing gate

 

Measure for your pool fencing leaving 2 feet of walkway between your pool and the fence.

Step One: Measure the perimeter of your pool. If possible, leave at least 2 feet of walkway inside and outside fenced areas. Strive for straight runs, installation is easier with fewer curves. Use chalk, rope or yarn to outline your pool safety fence on the concrete or concrete pavers (Deck sleeves must be put into at least 2" depth of concrete or Pressure Treated wood).

Select your Self Closing, Self Latching pool fence gate. (optional item) More than one gate can be used, if multiple safe swimming pool entrances/exits are desired or required.

Draw a sketch of the pool and the pool safety fence outline. Mark all lengths and measurements. Determine total pool fence perimeter measurement, and divide by ten (10). Round up to the next highest whole number. Order pool fence sections Above. Pool Safety Fence Sections are fully adjustable to smaller lengths.

 
gli rotary hammer Step Two: Unpack your Protect-A-Pool Removable Fence. Everything you need comes in the box. Use the measuring template to mark where each hole will be drilled. Then using the Proect-A-Pool Drill Guide and your hammer drill, drill each of the holes according to the provided directions.
 
Pool Fence Installed with Sleeve Step Three: After epoxying the sleeves into each hole, you may install the fence panels. Once all the panels are in place, you are ready to latch the panels.
 
Protect-A-Pool Fence Instalation
Protect-A-Pool Fence Instalation

 

Gift Certificates
Bookmark and Share
Support-Returns-Tracking

No Image Available



Buy SSL Certificate

Share on TwitterShare on Facebook