YardGard™ Alarms are designed to alert you upon unsupervised entry to your yard or pool area. YardGard™ meets or exceeds state barrier alarm codes. Hardware is included for mounting on gates, doors, and windows. There are two models to choose from - the YG03, with 7-second delay for adult pass-through, and the programmable YG18 that allows you to set your own entry/exit code. The YG18 also allows you to set the adult pass-through delay to 7 or 15 seconds

• Convenient Single Button Pass / Reset Operation
• 7-Second Delay Allowed for Adult Pass-Through
• 120 dB Alarm Siren - Minimum 95 dB at 10 feet
• Auto Low Battery Chirp
• All Hardware Included for Gate, Door or Window Mount
• Listed by ETL to UL Standard 2017 and CETL to CSA Standard C22.2 No. 205
• Water-Resistant
• Always On Device as Required by Barrier Codes
• Can be Manually Reset or will Automatically Reset in 3 Minutes
• Always Resets to Standby State in 30 Seconds After Last Switch Activation
• Alarm Goes Off Immediately When Triggered as Required by Barrier Codes
• Operates on 1 - 9-Volt Battery (not incl.)

• Program Your Own Entry/Exit Code
• Convenient Single Button Pass / Reset Operation
• 7 or 15 Second Delay Allowed for Adult Pass-Through
• 120 dB Alarm Siren - Minimum 95 dB at 10 feet
• Auto Low Battery Chirp
• All Hardware Included for Gate, Door or Window Mount
• Listed by ETL to UL Standard 2017 and CETL to CSA Standard C22.2 No. 205
• Water-Resistant
• Always On Device as Required by Barrier Codes
• Can be Manually Reset or will Automatically Reset in 3 Minutes
• Always Resets to Standby State in 30 Seconds After Last Switch Activation
• Alarm Goes Off Immediately When Triggered as Required by Barrier Codes
• Operates on 1 - 9-Volt Battery (not incl.)